FAQs
FAQs
Below is a list of the most common issues as well as their causes and remedies. Please click on a link for more information.
Problem Solving
Separation of Liquid
Sagging of Film (Curtaining)
Skinning of Liquid
Streaks
Lack of Flow
Non-Drying or Poor Drying
Spotty Drying
Lack of Hiding
Poor Adhesion of Film
Lack Of Adhesion Between Coats
Brittleness
Flat Spots
Excessive Spray Fog
Excessive Body (Material Too Thick)
Cracking Or Crazing Of Film
Too Little Coating Weight
Excessive Marring
Discoloration
Finish Printing
Orange Peel
Dirty Or Seedy Finish
Blushing
Haze
Oil Bloom
White Spots
Brown Spots
Pinholes Or Bubbling
Bleeding
Blistering
Excessive Settling
Cratering (The formation of small depressions in the coating)
Delamination of Finish Over Stain
Poor Adhesion of High Solids Coatings
Changes in Luster During Application
Proper Sanding (Prior to application of stain or finish)
Sanding / Finishing Tips
Post Catalyzed Products Application Guidelines
Hand Marks / Finger Prints On Finish Coat
Foaming (Water-borne Coatings)
Bubbles (On open pore wood)
Bubbling of Coatings (Latex)
Recommended Moisture Content For Wood Prior To Finishing
Spray Pattern Bottom Heavy
Spray Pattern Heavy To Right
Spray Pattern Heavy To Left
Spray Pattern Heavy At Center
Spray Pattern Split
Excessive Material Usage
Material Won't Spray From Spray Gun
Material Won't Flow From Suction Cup
Material Won't Pump From Pressure Tank Or Pressure Cup
Gun Sputters Constantly
Materials Leak From Spray Gun
Material Leaks Fluid Needle Packing Nut
Spray Pattern Top-Heavy
Pump Freeze-Up (Latex)
We Supply More Than Paint!
Norm's Paint Supply
3607 Brooklyn Avenue
Fort Wayne, IN 46809
219-478-6676
Home Page
|
Residential
|
Commercial / Industrial
|
FAQs
|
Contact Us
Site Manager Sign In
Powered by
Yellow Pages
